vms reverse camera

billy_308's Avatar

billy_308

17 Sep, 2018 10:08 PM

I recently purchased the vms 700hdx with reverse camera from 4wd supercentre and the instructions were pretty basic. It explained about the red and black wires but mentioned nothing about the black and white wires that go to a plug and are soldered together. I spoke to the 4wd supercentre and they knew nothing about that plug. Once hooked up the pictured wouldn't mirror on the screen so that everything was opposite, I spoke to the 4wd supercentre again and they said they had never heard of that before and that the camera must be faulty. Once I started googling the issue I came across several people asking here about the same problem and you posted a picture of said plug and advised people to remove the cap to flip the picture and it works fine now.

My suggestion would be to actually include that picture or information in the instructions, and possibly inform your distributors about it as well

  1. billy_308 closed this discussion on 17 Sep, 2018 10:08 PM.

  2. billy_308 re-opened this discussion on 17 Sep, 2018 10:15 PM

  3. Tech Support 9 closed this discussion on 17 Sep, 2018 10:37 PM.

Discussions are closed to public comments.
If you need help with VMS please start a new discussion.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac