Reverse Camera
Hi VMS Team! Im a Newbie and have been scolling through your support page...Amazing Well done. OK quick problem I have just installed a reversing camera (VMS) and the image is inverted, I have taken the jumper out, powered down and back up and off and disconnected overnight and unplugged and powered up and down again still inverted image??
Discussions are closed to public comments.
If you need help with VMS please
start a new discussion.
Keyboard shortcuts
Generic
| ? | Show this help |
|---|---|
| ESC | Blurs the current field |
Comment Form
| r | Focus the comment reply box |
|---|---|
| ^ + ↩ | Submit the comment |
You can use Command ⌘ instead of Control ^ on Mac
Support Staff 1 Posted by Tech Support 9 on 03 Dec, 2018 11:05 PM
Hello,
Is the image being displayed "upside down"?
If so, you have to unscrew the bracket to the camera body, rotate the camera body 180 degrees and then re-attach the bracket.
If the image is mirrored then removing the jumper is the solution.
Follow the attached diagram for more information.
Regards,
VMS support.