VMS 700HDX Touring
Ashlea
Stuck on oziexplorer. It's asking for name and code and not responding when i hit the OK or X buttons. I've tried turning off and on as well as resetting. Need help thanks
Discussions are closed to public comments.
If you need help with VMS please
start a new discussion.
Keyboard shortcuts
Generic
| ? | Show this help |
|---|---|
| ESC | Blurs the current field |
Comment Form
| r | Focus the comment reply box |
|---|---|
| ^ + ↩ | Submit the comment |
You can use Command ⌘ instead of Control ^ on Mac
Support Staff 1 Posted by Tech Support 9 on Aug 14, 2016 @ 11:17 PM
Hello Ashlea,
You may need to use the supplied stylus to tap on the OK on this code entry box, you may need to tap around it if tapping directly on it does not produce any results.
If you are looking at the OziExplorer screen, we supply this as a demo program.
Tap on the "OK" icon (you may need to tap slightly around it) to clear this box to continue the loading process.
When the programs loads you will see a map of Australia and on the bottom right will be a red "X" which you tap on to exit the program.
When the Ozi program is exited you will shown the navigation choices menu with Street / Off-Road selection choices, in the top right hand corner is the word GPS options, tap on this and then you will be able to select the default off-road program. Tap under VMS off-road and then tap on the back arrow. As long as no one enters this menu again you will not have to go through this procedure
VMS support.
2 Posted by Ash on Aug 15, 2016 @ 12:55 AM
Thanks none of that worked but took SD card out and it let us go back to original page
Sent from my iPhone
Support Staff 3 Posted by Tech Support 9 on Aug 15, 2016 @ 01:19 AM
Hello Ashlea,
If you can get to the screen that shows GPS Options tap on that then bullet under VMS Off-Road then tap the back arrow. After performing this step you will never see this code entry box again.